ОБЩЕЕ ОПИСАНИЕ

The ADuM1201 are dual-channel digital isolators based on the Analog Devices, Inc., iCoupler technology. Combining high speed CMOS and monolithic transformer technologies, these isolation components provide outstanding performance characteristics superior to alternatives, such as optocouplers. By avoiding the use of LEDs and photodiodes, iCoupler devices remove the design difficulties commonly associated with optocouplers.

The typical optocoupler concerns regarding uncertain current transfer ratios, nonlinear transfer functions, and temperature and lifetime effects are eliminated with the simple iCoupler digital interfaces and stable performance characteristics. The need for external drivers and other discrete components is eliminated with these iCoupler products. Furthermore, iCoupler devices consume one-tenth to one-sixth the power of optocouplers at comparable signal data rates.

The ADuM1201 isolators provide two independent isolation channels in a variety of channel configurations and data rates (see the Ordering Guide). Both devices operate with the supply voltage on either side ranging from 2.7 V to 5.5 V, providing compatibility with lower voltage systems as well as enabling a voltage translation functionality across the isolation barrier. In addition, the ADuM1200/ADuM1201 provide low pulse width distortion (<3 ns for CR grade) and tight channelto-channel matching (<3 ns for CR grade). Unlike other optocoupler alternatives, the ADuM1200/ADuM1201 isolators have a patented refresh feature that ensures dc correctness in the absence of input logic transitions and during powerup/power-down conditions.

The ADuM1201W is automotive grade versions qualified for 125℃  operation. See the Automotive Products section for more information.

 

ОСОБЕННОСТИ

Узкий корпус, RoHS-совместимый, 8-выводной пакет SOIC

Работа при низком энергопотреблении

Работа при напряжении 5 В

1,1 мА на канал максимум при скорости от 0 Мбит/с до 2 Мбит/с

3,7 мА на канал максимум при 10 Мбит/с

8,2 мА на канал максимум при 25 Мбит/с

3 В

0,8 мА на канал максимум при скорости от 0 Мбит/с до 2 Мбит/с

2,2 мА на канал максимум при 10 Мбит/с

4,8 мА на канал максимум при 25 Мбит/с

Двунаправленная связь

Перевод уровней 3 В/5 В

Работа при высоких температурах: 125°C

Высокая скорость передачи данных: от dc до 25 Мбит/с (NRZ)

Точные временные характеристики

Максимальное искажение ширины импульса 3 нс

Максимальное согласование между каналами 3 нс

Высокая устойчивость к переходным процессам в режиме общего тока: >25 кВ/мкс

Безопасность и нормативные разрешения

Признание UL

2500 В rms в течение 1 минуты согласно UL 1577

CSA Уведомление о приемке компонентов 5A

Сертификат соответствия VDE

DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12

VIORM = 560 В пик

Квалифицирован для применения в автомобильной промышленности

 

ПРИЛОЖЕНИЯ

Многоканальная изоляция, критичная к размерам

Изоляция интерфейса SPI/преобразователя данных

Изоляция приемопередатчиков RS-232/RS-422/RS-485

Изоляция цифровой полевой шины

Гибридные электромобили, монитор батареи и привод двигателя

 

ИНФОРМАЦИЯ О ПРИЛОЖЕНИЯХ

СХЕМА ПЕЧАТНОЙ ПЛАТЫ

Цифровые изоляторы ADuM1200/ADuM1201 не требуют внешних интерфейсных схем для логических интерфейсов. Настоятельно рекомендуется шунтировать источники питания на входных и выходных выводах.

Величина конденсатора должна составлять от 0,01 мкФ до 0,1 мкФ. Общая длина проводов между обоими концами конденсатора и выводом входного источника питания не должна превышать 20 мм.

КОРРЕКТНОСТЬ ПРИ ПОСТОЯННОМ ТОКЕ И УСТОЙЧИВОСТЬ К МАГНИТНЫМ ПОЛЯМ

Positive and negative logic transitions at the isolator input send narrow (~1 ns) pulses to the decoder via the transformer. The decoder is bistable and is therefore either set or reset by the pulses, indicating input logic transitions. In the absence of logic transitions of more than ~1 μs at the input, a periodic set of refresh pulses indicative of the correct input state is sent to ensure dc correctness at the output. If the decoder receives no internal pulses for more than about 5 μs, the input side is assumed to be unpowered or nonfunctional, in which case the isolator output is forced to a default state by the watchdog timer circuit.

ADuM1201 чрезвычайно невосприимчивы к внешним магнитным полям. Ограничением невосприимчивости ADuM1201 к магнитным полям является условие, при котором наведенное напряжение в приемной обмотке трансформатора достаточно велико, чтобы либо ложно установить, либо сбросить декодер. Приведенный ниже анализ определяет условия, при которых это может произойти.